[150 Feet / 50 Yards] 1.9 Inch Wide Aluminum Tape/Aluminum Foil Tape – Professional/Contractor
Total reviews 4.93K
Permatex 84101 PermaPoxy 5 Minute General Purpose Epoxy, 0.84 oz.
Total reviews 0.90K
MG Chemicals 8331D Silver Conductive Epoxy Adhesive, High Conductivity, 20 min Working time, 2
Total reviews 409
⋅ PRACTICAL - mixi...ng ratio (resin/hardener): 1:1 contained in repair stick / pot life at 25g quantity: 4min / hand-solid: 15min / mechanical load capacity: 60min / 100% strength: 24 hours
⋅ ALL-SURFACE ADHESIVE - The epoxy resin is wear resistant and high temperature resistant for interior and exterior repairs & bonding in industrial / household / for DYI projects / for construction work.
⋅ UNIVERSAL ADHESIVE - The glue stick fills and seals cracks / holes / defective areas / leaks / leaks on surfaces such as metal / wood / stone / concrete / glass / plastic.
⋅ WEICON - 100% German Quality - The adhesive meets the highest quality requirements in compliance with physical, safety, toxicological and ecological regulations.
⋅ Product 1: CURE AND SET TIME: After kneading the two part formula together by hand, WaterWeld takes 25 minutes to set and cures in 1 hour. J-B Weld WaterWeld set and cure color is off white.
⋅ Product 1: PRODUCT FEATURES AND STRENGTH: J-B Weld WaterWeld has lap shear strength of 1300 PSI, can withstand continuous temperatures up to 300F (149C) and intermittent temperatures of 350F (176 degrees Celsius) and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured.
⋅ Product 1: SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC.
⋅ Product 2: J-B Weld Plasticweld: A Hand Mixable Two Part Epoxy Putty Stick That Is Formulated To Repair And Rebuild Various Plastic Compounds And Surfaces. J-B Weld Plasticweld Is Designed For Diy Plastic Repairs On Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And More! Plasticweld Is Certified By The Nsf And Is Safe For Contact With Potable Water
⋅ Product 2: Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Plasticweld Takes 25 Minutes To Set And Cures In 3 Hours. J-B Weld Plasticweld Set And Cure Color Is Off White
⋅ Product 2: Product Features And Strength: J-B Weld Plasticweld Has Lap Shear Strength Of 600 Psi. Plasticweld Can Withstand Continuous Temperatures Up To 250Of (121Oc) And Intermittent Temperatures Up To 300Of (148Oc) When Fully Cured. Plasticweld Does Not Shrink And Can Be Molded, Shaped, Sanded, Drilled And Cut
⋅ Product 2: Applications: Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And Trim, Vinyl Surfaces And Siding, Marine Repairs & Fiberglass Parts, Plastic Water Tanks, And Plumbing